VMware – TheVirtualBoi

How to: Deploying a Synology VAAI Plugin

In an earlier post, I posted how users can quickly deploy a Synology Diskstation.

One of the things many people like to do with a Synology Disktation within a VMware Homelab environment (or production) is install the Synology VAAI VIB for hardware acceleration. In order to take advantage of this, your Synology will need to be added to your VMware environment as a target and be available as an Datastore to use. Installing this VIB allows for increased performance and better throughput via hardware acceleration with offload to the Synology CPU/RAM/CACHE.

Step 1: Download the VIB.

Step 2: Use a program SCP or in my instance, WINSCP to connect to you host. If you are using Windows and need WINCP, you can download it here. Extract the VIB and upload the VIB to the /tmp/ directory of your ESXi Host. You will need to use the credentials that are for the root account on your ESXi host.

Step 3: Enable SSH on the ESXi Host and run the following command:

esxcli software vib install -v /tmp/synology-nfs-vaai-plugin-1.2.1008.vib --no-sig-check

Step 4: Ensure the command ran successfully.

Step 5: Head to the Synology Datastore/Configure then look for the word Hardware Acceleration. Look for the “Supported” word, which means it is now enabled and working with hardware acceleration as intended.

First Head over to the /tmp/ directory using WinSCP (Windows).

Ensure you see the Extracted VIB within the /tmp/ directory.

The Plugin is selected for demonstration purposes.

Next, SSH into you ESXi host and run the following command.

esxcli software vib install -v /tmp/synology-nfs-vaai-plugin-1.2.1008.vib --no-sig-check

You can now see that Hardware Acceleration is supported.

How to: Deploying a Synology Diskstation DS418

Earlier this year, I debated on the idea of getting a Synology DiskStation for Home Lab use. The use case would be to have shared storage for my VMware environment. Additionally, having a local NAS at home would allow for flexibility to have mapped network drives on the workstations throughout the house. This, along with being able to scan to PDF and store on the NAS made the decision a no brainer!

There are two main players in the entry level NAS market. QNAP and Synology. I decided to go with the Synology due to the feature set of the DSM software.

In this quick blog will show how to do the initial setup of the Diskstation.

The BoM for this build is below

DiskStation Synology 4 Bay NAS DiskStation DS418 (Diskless)
WD Red 4TB NAS Internal Hard Drive – 5400 RPM Class, SATA 6 Gb/s, 256 MB Cache, 3.5″ – WD40EFAX

I decided to go with the 4 bay for future expansion. I started out with just two drives, but plan to go to 4 drives later.

Note: There are some issues with these drives it appears when researching online. I personally haven’t had any data loss, but be sure to research your drives before purchasing.

DiskStation1 — First: Pop in your drives and power on the device. Go to a web browser and go use either find.synology.com or diskstation:5000. The Web portal will then launch and search for a DiskStation within the local network. Note: The DiskStation status should be that of **Not Installed.**

DiskStation4 — Next, select Install DiskStation Manager (DSM). Alternatively, you can download the latest version manually and select manual install.

DiskStation5 — Since the Hard Drives were previously installed before boot up, the Synology Web Assistant will see these drives and import them. **Note: Any Data (if not new drives) will be lost! I used the** default RAID configuration of Synology SHR.

DiskStation6 — Next the DSM will now install.

DiskStation7 — The progress bar will continue as the DSM software is installed.

DiskStation8 — Next, create a server name, username, password, etc.

DiskStation9 — Finally, once the DSM software has been installed you will have an option to Setup QuickConnect.

Once DSM is installed successfully, you will be able to hit the IP of the Synology in a web browser and login successfully. From there you can install plugins, create shared folders using CIFS or NFS, etc.

I would highly recommend a Synology for anyone who takes setting up a HomeLab seriously. It is a large investment, but the ease of use, options and software make the investment worthwhile. Additionally, you can also use Hardware Acceleration for VMware Homelabs on certain models. Check back for a How To with regards to Hardware Acceleration.

How To: Upgrading to vSphere 7

Understanding the Upgrade Process

Since vSphere 7 has been out for a while, I figured it would be good to do a quick blog post on how to upgrade vSphere. I was currently running 6.7, and wanted to check out the process of upgrading using my existing VCSA. This upgrade is not like typical upgrades where you download a package and upgrade the software using the existing installation; rather, the VCSA process is a bit different in that each “upgrade” is a new deployment of the VCSA, and a migration of the data from the existing VCSA to the newly deployed VCSA. Fortunately, VMWare has made this process extremely easy. I have found this process to be very reliable as well. In essence, a new VM is deployed and a new VCSA is provisioned on using another IP. Then everything is migrated and the original VCSA is powered down. That’s pretty much it. Now, lets take a moment and see how the process unfolds step by step.

The Start of a new Journey: Becoming a vSAN Specialist

Yesterday, I was pleasantly surprised to read that VMware has announced their first certification for vSAN, which comes in the form of a VMware Specialist Badge. The VMware Specialist Badge will be given to those who know how to successfully design, deploy, and administer vSAN environments. Since I have a great interest in vSAN, I have decided to make it a personal goal of mine to obtain this new VMware Certification, which will align perfectly with my passion for DataProtection and vSAN. Since I have already obtained my VCP, I will only need to lab, study, then take the test! Now, the fun part; plan, execute, and obtain! Continue reading “The Start of a new Journey: Becoming a vSAN Specialist”

Introducing TheVirtualBoi Blog!

Hello Everyone, my name is Stephen Owens, and this is my new website titled thevirtualboi! I have been wanting to get into blogging for a while now, so this is my first step into blogging and becoming a regularly involved member within the #VMware and Technology community. I hope to regularly write about all things #VMware, #VSAN, and #DataProtection. I have a passion for DataProtection, business continuity, and ensuring others know the importance of having good backups. This is going to be a continuing ongoing project, with the hopes that I can learn from others and grow my own skills within. Here’s to a exciting new adventure!